Inspection Professionals, LLC 

Click here to edit subtitle

Radon Testing

EPA Recommends:

  • Test your home for radon -- it's easy and inexpensive.
  • Fix your home if your radon level is 4 picoCuries per liter (pCi/L) or higher.
  • Radon levels less than 4 pCi/L still pose a risk, and in many cases may be reduced.

Radon is estimated to cause thousands of cancer deaths in the U.S. each year.

 

* Radon is estimated to cause between 15,000 and 22,000 lung cancer deaths per year according to the National Academy of Sciences 1998 data.  The numbers of deaths from other causes are taken from 2001 National Safety Council reports.

 

Overview

Radon is a cancer-causing, radioactive gas.

You can't see radon. And you can't smell it or taste it. But it may be a problem in your home.

Radon is estimated to cause many thousands of deaths each year. That's because when you breathe air containing radon, you can get lung cancer. In fact, the Surgeon General has warned that radon is the second leading cause of lung cancer in the United States today. Only smoking causes more lung cancer deaths. If you smoke and your home has high radon levels, your risk of lung cancer is especially high.

Radon can be found all over the U.S.

Radon comes from the natural (radioactive) breakdown of uranium in soil, rock and water and gets into the air you breathe. Radon can be found all over the U.S. It can get into any type of building - homes, offices, and schools - and result in a high indoor radon level. But you and your family are most likely to get your greatest exposure at home. That's where you spend most of your time.

You should test for radon.

Testing is the only way to know if you and your family are at risk from radon. EPA and the Surgeon General recommend testing all homes below the third floor for radon. EPA also recommends testing in schools.

Testing is inexpensive and easy - it should only take a few minutes of your time. Millions of Americans have already tested their homes for radon.

You can fix a radon problem.

There are simple ways to fix a radon problem that aren't too costly. Even very high levels can be reduced to acceptable levels.

New homes can be built with radon-resistant features.

Radon-resistant construction techniques can be effective in preventing radon entry.  When installed properly and completely, these simple and inexpensive techniques can help reduce indoor radon levels in homes.  In addition, installing them at the time of construction makes it easier and less expensive to reduce radon levels further if these passive techniques don't reduce radon levels to below 4 pCi/L.  Every new home should be tested after occupancy, even if it was built radon-resistant.

How Does Radon Get Into Your Home?

Radon is a radioactive gas.  It comes from the natural decay of uranium that is found in nearly all soils. It typically moves up through the ground to the air above and into your home through cracks and other holes in the foundation. Your home traps radon inside, where it can build up. Any home may have a radon problem. This means new and old homes, well-sealed and drafty homes, and homes with or without basements.

Radon from soil gas is the main cause of radon problems. Sometimes radon enters the home through well water (see "Radon in Water" below). In a small number of homes, the building materials can give off radon, too. However, building materials rarely cause radon problems by themselves.

RADON GETS IN THROUGH:
Any Home may have a radon problem

 

1. Cracks in solid floors
2. Construction joints
3. Cracks in walls
4. Gaps in suspended floors
5. Gaps around service pipes
6. Cavities inside walls
7. The water supply

Nearly 1 out of every 15 homes in the U.S. is estimated to have elevated radon levels. Elevated levels of radon gas have been found in homes in your state. Contact your state radon office for general information about radon in your area. While radon problems may be more common in some areas, any home may have a problem. The only way to know about your home is to test.

Radon can be a problem in schools and workplaces, too. Ask your state radon office about radon problems in schools, daycare and childcare facilities, and workplaces in your area.

 

How to Test Your Home

You can't see radon, but it's not hard to find out if you have a radon problem in your home. All you need to do is test for radon. Testing is easy and should only take a few minutes of your time.

The amount of radon in the air is measured in "picoCuries per liter of air," or "pCi/L." Sometimes test results are expressed in Working Levels (WL) rather than picoCuries per liter (pCi/L). There are many kinds of low-cost "do-it-yourself" radon test kits you can get through the mail and in hardware stores and other retail outlets. If you prefer, or if you are buying or selling a home, you can hire a qualified tester to do the testing for you.

There are Two General Ways to Test for Radon:

 

 

SHORT-TERM TESTING:
The quickest way to test is with short-term tests. Short-term tests remain in your home for two days to 90 days, depending on the device. "Charcoal canisters," "alpha track," "electret ion chamber," "continuous monitors," and "charcoal liquid scintillation" detectors are most commonly used for short-term testing. Because radon levels tend to vary from day to day and season to season, a short-term test is less likely than a long-term test to tell you your year-round average radon level. If you need results quickly, however, a short-term test followed by a second short-term test may be used to decide whether to fix your home. 

(Average fee: $150 - $200)

LONG-TERM TESTING:
Long-term tests remain in your home for more than 90 days. "Alpha track" and "electret" detectors are commonly used for this type of testing. A long-term test will give you a reading that is more likely to tell you your home's year-round average radon level than a short-term test.

If test results of the Radon test show elevated radon levels, they can be verfied and easily and permanently fixed by a RMP Certified Radon Mitigation Contractor. Since elevated radon levels are mainly a health hazard only after long term exposure, it's in your best interest to test radon level prior to buying a new home. Once the radon situation is corrected, many people also notice the air quality in the home has been improved (no musty odors). The average costs of installing a Radon Mitigation System typically range from $1,000 - $2,000.

EPA Map of Radon Zones

TENNESSEE

The U.S. EPA and the U.S. Geological Survey have evaluated the radon potential in the U.S. and have developed this map to assist National, State, and local organizations to target their resources and to assist building code officials in deciding whether radon-resistant features are applicable in new construction. This map is not intended to be used to determine if a home in a given zone should be tested for radon. Homes with elevated levels of radon have been found in all three zones. All homes should be tested regardless of geographic location. The map assigns each of the 3,141 counties in the U.S. to one of three zones based on radon potential. Each zone designation reflects the average short-term radon measurement that can be expected to be measured in a building without the implementation of radon control methods. The radon zone designation of the highest priority is Zone 1.

              Zone 1

Highest Potential (greater than 4 pCi/L)

              Zone 2

Moderate Potential (from 2 to 4 pCi/L)

               Zone 3

Low Potential (less than 2 pCi/L)

 

 

  

FOR MORE INFORMATION USE THE LINK ON THE NAV BAR TO THE RIGHT